LSW5662 Series
Traditional intranet is a shared network, with no access control on terminals or mutual access among terminals. This vulnerability can be easily exploited by hackers to spread viruses and attacks. In case of intranet security incidents, it is impossible to locate and control the source of attack in the first place and extremely difficult to trace back. DPtech LSW5662-SE Series Self-Secure switches provide the network with security protection and exception disposal capabilities by taking advantage of intelligent computing technology. The built-in behavior model and baseline detection provides the Self-Secure switches with immunity to virus transmission, network attacks, and hacker penetration. With automatic policy deployment, self inspection and recovery of ring networks, and baseline detection, it can further extend its security protection to intranet, realizing threat suppression of key nodes of network, operation and maintenance of the entire network, and simplified network management.
MoreWith four 10-Gigabit optical interfaces and flexibly scalable Gigabit interfaces, the LSW5662 Series is a full wire-speed interconnection solution with the highest cost-effectiveness.
It supports a wide array of high performance expansion boards, including 40G expansion boards, 10G optical/electrical expansion boards, and flexible Gigabit optical/electrical expansion boards, it provides high performance scalability to meet the diverse networking needs of large-scale network convergence or small-scale network cores.
The LSW5662 Series adopts an environment-enhanced design, which provides features such as a wide range of operating temperature (i.e., 0~70℃) and pressure, and lightning protection. This helps ensure highly reliable operation in complex electrical environments (e.g., corridor equipment room) and air-conditioning free deployment environments.
A number of statuses and alarms can be provided, including environmental alarms, power supply and fan alarms, interface, and CPU status.
Compatible with fast ring network recovery protocol (FRRP) and fast link recovery protocol (FLRP), the LSW5662 Series provides a self-recovery performance of less than 20 milliseconds. Multiple services and heavy traffic will have no impact on convergence time, thus ensuring the normal business operation.
The LSW5662 Series adopts Virtual Switching Matrix (VSM) technology, which performs virtualization of multiple physical devices into a single logical device for unified configuration and management.
The LSW5662 Series provides multiple centralized authentication modes based on MAC address, 802.1x, and Portal. With a built-in authentication server, it supports local access authentication for 1K users. It supports dynamic or static binding of user identity, such as user account, IP, MAC, VLAN, and interface. Dynamic distribution of policies is supported.
The LSW5662 Series is provided with enhanced ACL by supporting large-capacity ingress and egress ACLs. It also enables ACL distribution based on VLAN, which simplifies user configuration and avoids waste of ACL resources.
The LSW5662 Series supports L2~L4 packet filtering and traffic detection on ports. It provides multiple stream classifications based on source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN. With priority queues based on hardware, it is compatible with multiple queue scheduling algorithms such as SP, WRR, and SP+WPP. Support congestion management and rate limits on interfaces.
The LSW5662 Series supports IPv4/IPv6 dual stack and IPv6 over IPv4 Tunnel (including manual Tunnel, 6to4 Tunnel, ISATAP Tunnel) as well as IPv6 layer 3 wire-speed forwarding. It can be flexibly deployed on a network with only IPv4 or IPv6, or with both IPv4 and IPv6, thus satisfying the transition requirements from IPv4 to IPv6.
Subscription account
Service account
WeiBo
